Feeds:
Posts
Comments

Posts Tagged ‘backsplash’

 


is proud to introduce

 NEW PROFILES

for Spring 2013

Changing from winter to spring changes a lot of things and inspires everyone to spruce things up.  Kodiak Mountain Stone is proud to announce some new profiles for Spring 2013.   These profiles are slightly different than some of our current profiles but broaden and strengthen our overall product
lineup.

Here are a few of our new profiles:

  

Glacier Dry Stack Ledge

Glacier has always been a popular color in our ready stack and with our new 3″ high profile it will continue to draw the eye with edge and color.

 

  Colorado Rundle Stacked Stone 

Similar to our current Frontier Ledge; we cross over the exclusive color of Colorado Rundle to give you a nice tight dry stack look

   

Glacier Stacked Stone
Perfect for interior or exterior use; this glacier color will provide accent and and texture to any project!

 

Walnut Stacked Stone 

With warm tones of brown this Stack is going to be all the rage on any project.  The rich color and sleek stack will enhance your home or business

   

Walnut Dry Stack Ledge 

Long and narrow chiseled look gives a stacked ledge a rustic feeling and appearance that is perfect for the front of your home or a fireplace.

   

Black Diamond Cobble Ledge  

With a old European feel; Cobble ledge blends architecture with style to highlight  solid structural appearance.  Dark coloring with contrast makes this stone stand out and makes it look authentic and aged.

  

  RedStone Cobble Ledge

Gives you the antique look with the vibrant modern colors.

 

Shale Ledge

Stone was the building blocks of modern civilizations and shale ledge with its chiseled narrow look gives a warm historic feeling of centuries long gone.

 We still have all our Kodiak Mountain Stone profiles available as well as being the exclusive dealer in Canada for Veneerstone.  We have many profiles and colors available and in-stock for your next project.

 Call us or visit one of our showrooms for more information.

Advertisements

Read Full Post »

Question: I am planning on putting Kodiak Mountain Stone manufactured stone on the exterior of my house and on my fireplace.  How is it installed?  Can I do it myself?

Kodiak Mountain Stone manufactured stone can be installed by a professional mason or the do-it-yourself (DIY) home owner.  Properly installing our manufactured stone products is the most important part of ensuring a long-lasting, beautiful project.  There are definite advantages of using a professional mason and we would be happy to try to help you find one if you wish.  But if you want to instal your stone on your own, we are here to help.

Visit our website at www.KodiakMountain.com if you would like to download our Installation Guide in .pdf format.

Estimating Material Needed:

Whether you are putting stone on your fireplace, a feature wall or on the exterior of your home, the first step is to estimate the amount of stone that you will need for the job.

  1. Measure the square footage of the area to be covered with your Kodiak Mountain Stone veneer.  For example, the surface you are covering may be 12 feet long at the base and 12 feet high.  You would calculate this as 12 x 12 = 144 square feet (SF).  The stone used on these surfaces are referred to as “flats.”  The flats are on the flat surface of the project while the other option is “corners” which obviously are used on the corners of the project (they come in 90 degree pieces)
  2. Next you would determine the area of any large openings such as windows and doors where the stone is not going to be applied.  When you calculate this square footage, subtract it from the square footage you calculated in step 1.
  3. The next step is to determine the amount of corner pieces that you will need.  Our stone comes with 90 degree corners in all of our styles (Some of our natural stone products do not have 90 degree corners).  While our flats are measured in square footage, corners are measured in linear feet.  So to determine the amount you need for corners, measure the linear footage of the corners you will be putting stone around.  For example, if you are going around two different corners and they are each four feet tall, you would need eight linear feet of corners (2 corners x 4′ = 8 linear feet)
  4. Because the corner pieces do cover some of the area that we have previously measured for the square footage of flats, for each linear foot of corners subtract 1/2 foot off of the total square footage of flats you previously calculated.  In our example, if you need 8 linear feet of corner pieces, subtract 4 square feet of the needed flats calculated in steps 1 & 2.
  5. When installing your manufactured stone there will be times that you need to cut and fit the stone.  At times there may even be some broken stones that come in the boxes.  During shipping some breakage may occur.  These stones can be used when cutting and fitting is needed.  For this reason plus the possibility of errors in measuring, we suggest when you order your stone you order about 10% more than you anticipate needing.

Tools Needed:

Many of the tools you will need to instal your stone are available from us at our stores in Calgary and Lethbridge AB.  If you do not live near either of these locations they should be available at your local hardware stores.  The tools you will need may include:

  • Hammer
  • Level
  • Grinder &/or saw, complete with masonry cutting blade
  • Safety glasses
  • Dust Mask
  • Grout Bag
  • Soft Bristled Brush
  • 1 3/4 Roofing Nails
  • Tin Snips
  • Wheel Barrow
  • Hoe
  • Masonry Trowel
  • Hawk
  • Spacers or shims
  • Hammer Tacker complete with staples
  • Stiff Bristle Brush

Preparing the Surface

We have a very informative surface preparation video online at the following link: Preparing Surface for Stone

  1. Moisture Barrier
  • The moisture barrier is an extremely important part of the installation.  Without a proper moisture barrier you can run into significant problems down the road.  This is one area of concern with not having a professional installing your Kodiak Mountain Stone products.  If you ensure you follow the provided guidelines, you won’t have a problem. Please watch the video above to learn more about surface preparation.
  • If you are installing your stone over wallboard, paneling, plywood, or other rigid wood related sheathing, it is necessary to cover the wall surface with a moisture barrier.  In most cases, building codes are satisfied by using two (2) layers of tar paper or two-ply 60 minute grade D paper.  Make sure to check your local building code requirements. Be sure that the sheets overlap from the bottom up.  Overlap two inches on the horizontal seems and six inches on the vertical seams.  Flashing, weep screed, and appropriate drainage means are required at stoppage points of stone veneer and at any places of potential penetration.
  • When stone is to be installed over clean brick, block, cement board or other masonry surfaces, no moisture barrier is necessary.
  • Check your local building codes for required flashing specifics and to ensure these instructions meet specific moisture barrier requirements.
  1. Wire Lath
  • Directly over the moisture barrier, cover the area with a wire lath.  We recommend using at least a 2.5 lbs (1.71 kg) diamond mesh expanded wire lath meeting the requirements of ASTM C 847.  Overlap lath sides and ends no less than one inch.  Be sure that lath is attached with the small cups pointing upward.  Attach the lath using galvanized nails or staples every 6 inches on center vertically, and 16 on center horizontally, ensuring to penetrate studs.  Use staples or fasten any loose areas between the studs.  Use tin snips to cut the lath.
  • With corners, ensure that the lath is tightly folded.  Never have a seam on the corner.  Nail the lath on both faces of the corner

Mixing  Mortars

For detailed instructions on mixing your mortar from scratch, please visit our installation guide online at http://www.kodiakmountain.com/technical/installation.htm.  If mixing your own mortar, ensure that all ingredients comply with, and are mixed to meet ASTM standards and/or local building codes.

You will have three different applications of mortar: The Scratch Coat, Mortar, and Grout

At our stores in Lethbridge and Calgary we sell a pre-mix mortar that just requires adding water and mixing thoroughly.  Mortars and mixtures can vary, so please follow the directions on the bags of mortar that you purchase.  The bags of mortar will also indicate the coverage amount of each bag.

Scratch Coat

  • Cover the entire wire lath with an even layer of mortar with a cement trowel.
  • While the cement is still wet, gently scrape it with a fine bristled brush or hair pick.  The resulting grooves rough up the scratch coat, which creates a better bond when the stone is applied.  Brush gentle enough that no mortar is removed from the wall.
  • Let the scratch coat dry sufficiently.  Depending on temperature, humidity, airflow, mix, etc this can take 8 to 24 hours.

Applying the Stone

  • Before applying stone, ensure that proper measures are taken to divert water runoff away from the stone.  Excess run-off and splashing can, over time, stain the stone.  
  • Mix a batch of mortar according to the instructions in our guide or on the bag of mortar mix
  • Using a trowel, apply a 1/2″ layer of mortar on the back of the individual stones.  Press the stone firmly into the scratch coat to ensure a good bond.  Press hard enough to squeeze out a little mortar around the edges of the stone.  Make sure you have complete coverage between the mortar bed and the surface of the stone.
  • The corner pieces should be installed first alternating the long and short ends of the corner pieces in opposite directions.
  • Next apply the flat pieces by starting at the outer edges and working towards the center of the wall.
  • Cutting & Trimming: You may use nippers, the edge of your trowel, or a circular saw with a masonry blade to cut and shape the stone.  If necessary, broken stones can be trimmed and shaped to fill in any gaps.  Avoid having any cut edges of the stone visible.
  • Grouting Joints: When a mortar joint is to be used, fill in the joints with a mortar bag, taking care to avoid getting mortar on the stones’ surface.  Joints should be 1/2″ to get the most natural look.  Any accidental smears can be removed with a whisk broom after the mortar is crumbly.  Never use a wet brush, wire brush, acid or acid-based product to clean the stone.
  • Finishing Joints: Proper jointing gives your project an appealing and professional finish.  Allow mortar joints to become firm (approx. 30-60 min), then point them up with a jointing tool.
  • Brush Joints: Remove excess mortar then firmly compress and seal the edges around the stones.  Brush stones and joints with a dry whisk broom to finish and clean your project.
  • Dry Stack (Mortarless) Application: In dry stack application where no mortar joints are used, a bonding agent may be added to the mortar mix for better bonding.  It is also recommended to use a breathable (non-film-forming) sealer.  (no gloss, low gloss and high gloss sealers are available).  Install dry stack stone from the bottom up and keep joints as level as possible.

Cleaning and Sealing

Clean Kodiak Mountain Stone products with a soft bristle brush and water.  If stained with mineral deposits or efflorescence, stone may be cleaned with a diluted household vinegar solution (7 parts water, 1 part vinegar).  Rinse thoroughly with clean water after cleaning.  Do not use wire brushes or acid to clean Kodiak Mountain Stone manufactured stone.  Contact our office at 1-877-563-4252 or visit one of our stores or one of our dealers to explore our various sealing options.

Read Full Post »

Ideas & Suggestions

Did you know Kodiak Mountain Stone is a great Product for Interior Use?

Stone has always been an attractive finishing touch to any project and is becoming very popular on all sizes of projects. With the growing popularity; manufactured stone has become increasingly more attractive as well due to weight, finish and overall price.   Manufactured Stone has been a popular alternative for exteriors for decades but there is a growing trend towards Manufactured Stone and Kodiak Mountain Stone products on interiors for both home and commercial applications.

Fireplaces have always been an interior focal point in any home with stone but moreover other projects are evolving and  using Kodiak products. Kodiak Mountain Stone can give your interiors more warmth and durability with a sense of style in any kitchen, bathroom, wine cellar or even feature walls. Kitchens are the heart of any home and the nature of a kitchen can be captured through stone in modern or contemporary styles. There is a durability and a sense of belonging if the right stone is chosen for a kitchen and can tie that kitchen to nature.  Wouldn’t your island stand the test of time(if not your kids shoes) if surrounded by a beautiful stack stone?

Bathrooms with shower enclosures accented with stone are another way of warming up a dreary space or even a small stone wall to accent your tub. Stone back-splashes are simple yet functional and don’t interfere with the faucets or other features yet increase the value of your home or project.

Many times designers pick stone to enhance an otherwise drab boring wall and make it a feature in your home. Kodiak Mountain Stone will bring vibrance to a wall or area through contrast. An accent wall will change a room or an area and make it more appealing and in many cases increase the value of a home.

By replicating natural stone in many surroundings is a great way to add value, durability and elegance to an otherwise boring area in an inexpensive professional way. Please check out our website at www.KodiakMountain.com for other suggestions or galleries of ideas for your special space.

Sign up for Our Newletter:

Click Here to Join our Newsletter

Read Full Post »